Philips BDL4211V User Manual

Contents

User Manual BDL4211x26How to connect a plugThe wires in the mains lead are colored in accordance withthe following code:BLUE - "NEUTRAL" ("N")BROWN - "LIVE" ("L")GREEN & YELLOW - "EARTH" ("E")1. The GREEN AND YELLOW wire must be connected tothe terminal in the plug, which is marked with the letter"E" or by the Earth symbol or colored GREEN orGREEN AND YELLOW.2. The BLUE wire must be connected to the terminal, whichis marked with the letter "N" or colored BLACK.3. The BROWN wire must be connected to the terminal,which marked with the letter "L" or colored RED.Before replacing the plug cover, make certain that the cordgrip is clamped over the sheath of the lead - not simply overthe three wires.2.4.4 OTHER RELATED INFORMATIONInformation for Users in the U. S.For units set at 115V:Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductorcord a maximum of 15-feet long and a parallel blade, grounding type attachment plug rated 15A,125V.For units set at 230V:Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductorcord a maximum of 15-feet long and a tandem blade, grounding type attachment plug rated 15A,250V.Information for Users outside the U.S.For units set at 230V:Use a Cord Set consisting of a minimum 18 AWG cord and grounding type attachment plug rated15A, 250V. The Cord Set should have the appropriate safety approvals for the country in whichthe equipment will be installed and / or be marked HAR.