Philips HD7854 User Manual

Also see for SENSEO HD7854: User manual Quick start guide Manual User manual User manual

Contents

96 Slide the milk container unit into the coffeemachine (1) and push down the milkcontainer lever (‘click’) (2) (Fig. 5).D Note:Push down the milk container lever as faras possible (‘click’) to make sure that themilk container unit is placed properly in themachine. You only obtain properly frothed milkif the milk container unit is placed properly.5.8 Adjusting the cup trayheight1 Place one or two cups under the coffee spout.E Tip:Do not use cups that are too large as theycause the coffee to get cold more quickly.2 To minimise splattering, turn the knobto adjust the height of the cup tray sothat the top of your cup is just under thespout (Fig. 26).5.9 Brewing the desired coffeevariety1 Press the button indicating the number of cupsof SENSEO® coffee you want to brew. (Fig. 8)• Press the 1-cup button q for one cup ofSENSEO ® black coffee, cappuccino, lattemacchiato or caffè latte.• Press the 2-cup button qq for two cupsof SENSEO ® black coffee.• The SENSEO® coffee machine starts brewingand automatically supplies the correctamount of water and milk, depending on thecoffee variety you have selected.B Warning:Do not remove the water reservoir during abrewing cycle, as this causes the machine todraw in air. When this happens, the next cupis only partly filled.B Warning:Do not remove the milk container during abrewing cycle.• Select e for a smaller amount of strongblack coffee (60ml).• Select d for a normal amount of normalblack coffee (125ml).• Select c for a larger amount of mild blackcoffee (145ml).D Note:You cannot press the strength selectorwhen you have selected one of the coffeevarieties with milk.5.7 Filling the milk containerunitD Note:This section only applies if you have selected oneof the coffee varieties with milk as described inthe previous section ‘Selecting the desired coffeevariety’. If you have selected SENSEO ® blackcoffee, go straight to section ‘Adjusting the cuptray height’.1 Pull the milk container lever upwards withyour finger to release the milk containerunit (Fig. 21).2 Pull the milk container unit forwards toremove it from the machine (Fig. 22).3 Press the milk container lid release lever (1),tilt the milk container lid slightly (2) and pullthe milk container lid upwards to remove itfrom the milk container (3) (Fig. 23).4 Fill the milk container with cold milk straightfrom the refrigerator (5-8°C) up to the levelrequired for the coffee variety (Fig. 24).D Note:The amount of milk added to the coffee mayvary due to variations in milk temperature ortype of milk. It may also depend on how cleanthe milk container unit is.5 Fasten the milk container lid onto the milkcontainer (‘click’) (Fig. 25).B Warning:Always check if the lid is fixed properly ontothe milk container to prevent spillage whenyou place the milk container unit in themachine.ENGLISH