Preparation1 Switch off the machine.Note: If you do not switch off the machine, you cannot enter thedescaling2 Empty the drip tray and place it back. Remove the classic milkfrother (if present).3 Empty the water tank and remove the Intenza+ water filter (ifpresent). Pour the entire bottle of descaling solution into the watertank.4 Add water to the descaling solution in the water tank up to theMAX indication.5 Make sure the control dial is set to the coffee bean icon.6 Place a big cup under the hot water/steam wand.Descaling cycle5 sec1 Press the espresso button and regular coffee buttonsimultaneously for approximately 5 seconds.The orange descaling light flashes slowly during the entiredescaling cycle.2 Turn the control dial to the hot water icon and brew hot water. Lethot water flow out of the hot water/steam wand for 10 seconds.23English