Preparing for useFilling the water tank1 Remove the water tank from the machine.2 Rinse the water tank under the tap.3 Fill the water tank with cold tap water up to the MAX indication.Warning: Never fill the water tank with warm, hot or sparklingwater, as this may cause damage to the water tank and themachine.4 Slide the water tank back into the machine.Filling the coffee bean container1 Fill the coffee bean container with espresso beans.Note: Only use espresso beans. Never use ground coffee,unroasted coffee beans or caramelised coffee beans, as this maycause damage to the machine.2 Put the lid on the coffee bean container.Heating up the machineDuring the initial heat-up process, fresh water flows through theinternal circuit to heat up the machine.This takes a few seconds.10 English