Philips HD8651 User Manual

Also see for HD8651: User manual Manual User manual Manual

7 Remove the drip tray, rinse it and place it back.8 Reattach the classic milk frother.9 Remove the water tank and rinse it.10 Reinstall the Intenza+ water filter (if present).11 Fill the water tank with fresh tap water up to the MAX indicationand slide the water tank back into the machine.12 Press the on/off button to switch off the machine.When you switch the machine back on, it is ready for use again.Interruption of the descaling processIf the machine gets stuck in the descaling procedure, you can pressthe on/off button.This allows you to complete the descalingprocedure. Follow the steps below to make sure your machine isready to brew coffee again.5 sec1 Press the espresso button and regular coffee buttonsimultaneously for approximately 5 seconds.2 Remove the drip tray, rinse it and place it back.3 Remove the water tank and rinse it.4 Fill the water tank with fresh tap water up to the MAX indicationand slide the water tank back into the machine.5 Press the espresso button and brew a cup of espresso. Repeat thistwice.6 Turn the control dial to the hot water icon. Let hot water flow out ofthe hot water/steam wand until the 'water tank empty light' lightsup continuously.7 Remove the drip tray, rinse it and place it back.8 Reattach the classic milk frother.9 Remove the water tank and rinse it.10 Reinstall the Intenza+ water filter (if present).11 Fill the water tank with fresh tap water up to the MAX indicationand slide the water tank back into the machine.12 Press the on/off button to switch off the machine.When you switch the machine back on, it is ready for use again.25English