Q-See QC818 User Manual
Also see for QC-SERIES: User manualUser manualSetup guideQuick start guideUser manual
                                              | |
Contents
| 
66 67No changes will take place unless the Execute button is pressed once you’ve made yourselection. The drive’s status will be displayed next to the Type heading below the pull-downs.If you make changes and press Execute, the NVR will restart once you press OK to exit. Youcannot right-click out of the menu.ERROR ALERTSEvent TypeEnableShow Message Alarm upload Send EmailBuzzerNo DiskSave CancelEvent type – Chose from No Disk, Disk Error,Disk No Space, Net Disconnectedand IP Conflict.Show Message – When enabled, this willdisplay the event notification on theNVR’s screen.Alarm Upload – This feature is not availableon this model.PICTURE 4-34Send E-mail – this will send an e-mail notification to the recipient address set up in theNetwork menu (see Section 1.2 Advanced Network Setup in the RemoteMonitoring Guide).CAUTION! Reformatting the hard drive will erase all recorded events.The next section of the HDD Info window allows you to set any installed hard drives to one offour states:Read/Write Normal operation. The device records (writes) files to disk and plays (reads)them.Read Only No more files can be recorded onto the drive, but existing files can be viewed.Format Reformats the hard drive.Recover If you are having problems with the hard drive, including corrupted files,selecting Recover causes the drive to re-set, but does not erase its contents.ERROR ALERTSThis window allows you to set up alarms for disk and system disconnection errors as well ashow these alarms are handled. Each type of alarm can be independently enabled along withwhat events that type of alarm will trigger.ACCOUNTThis is the account management window which allows you to add or delete users, create usergroups, modify the access privileges of users, and create or change passwords.There are two pre-configured defaultusers; Admin, and 666666. Only Admin hasadministrator rights.When adding a user, you not only create theiruser name and password, but you can grantor deny control over specific activities on theNVR, including which cameras that user canview or play back. These privileges can bechanged later by an administrator-level userusing the Modify User button. AdministratorUsers have control over 60 different functionswhile basic Users have 35 functions that canbe allowed or denied.PICTURE 4-35PICTURE 4-36A user or group name can consist of at most eight characters and no two users may have thesame user name. There is no limit to the number of users or groups.The Memo field allows you to include a note about the user or group that is only visible in thiswindow.Toggling the Reusable box allows more than one user to log in using this accountCreating a group gives you the ability to set the access privileges for as many users and anyusers’ rights cannot exceed that of the group they are in.Selecting Modify Password opens a new window which allows you to select the user whosepassword you want to change. Enter the old password and then the new password twice.AUTO MAINTENANCEMuch like a regular computer, this NVRbenefits from being restarted after extendedperiods of operation.You can determine when the system willautomatically reboot and you can optionallyhave it auto-delete old files at that time aswell. You can set this option to delete filesthat are 1-31 days old. |
Related manuals for Q-See QC-SERIES
manualsdatabase
Your AI-powered manual search engine