Q-See QR404 User Manual

Q-See QR404 User Manual Manual pdf 14 page image

QR404 User Manual10Please note that any modifications you make through the CameraSetup interface will not be applied until you click the [APPLY] button atthe bottom of the dialog box (Picture 5). Once you do this, you willthen be prompted to save your settings, and you must click [OK] inorder for the changes to take effect. If you wish to abort the changesyou made, simply click the [Exit] button on the bottom of your dialogbox (Picture 5). By clicking on the [DEFAULT] button at the bottom ofyour Color Setup dialog box (Picture 5) all system default values willbe reset to their original factory installed settings.5.2.2: Record SetupThe right click menu in the Main Interface mode (Picture 3) allows youto access the Main Menu interface (Picture 4). To set up the recordingparameters and settings of your DVR, go to [Main Menu] [Record] toenter into the [Record Setup] menu (Picture 6).The [Record Setup] menu (Picture 6) allows you to turn the recordingstatus for each camera channel on and off, set the recorded imagequality and enable audio recording. This menu also allows you toschedule your recording times and set your recording file sizesthrough the quality setting.The [RECORD] button on your Record Setup Menu (Picture 6) allowsyou to turn each camera channel’s recording ability on or off. The[QUALITY] button gives you the option of choosing the quality of yourrecorded images from a drop down list for each individual camerachannel. The [AUDIO] button allows you to turn the audio input on oroff. When the audio is turned off, the DVR system will not recordaudio and you will not hear sound during playback of your recordedevents.The [REC MODE] drop down list allows you to setup the system torecord 24 hours a day, on a set schedule or when motion is detected.The [FILE SIZE] drop-down list allows you to set the maximumrecording time for all recorded files to be 15, 30, 45 or 60 minutes.TIME SCHEDULED RECORDING: To set your system up to record on a time schedule, choose the TIMESCHEDULE RECORD option on the REC MODE drop down list. To record 24 hours a day, choose the ALWAYSoption from the REC MODE drop down list. To record on motion or a set schedule, select Time Schedule Recordand click the “Schedule” option. Choosing this option will initiate a pop-up SCHEDULE interface which will allow youto customize your scheduling options as illustrated by Picture 6A. You can choose from a pull down menu at the top(Picture 5B)(Picture 6A)(Picture 6)