Q-See QR404 User Manual

Q-See QR404 User Manual Manual pdf 15 page image

QR404 User Manual11(Picture 8)of your SCHEDULE interface to adjust the recording options for all channels or from the channels specified in thedrop down menu if you prefer to set the recording parameters for each individual channel separately.You are also given the option of setting up the date parameters of your scheduled recordings by choosing from thedrop down menu on the bottom of your Schedule interface in the “From” and “To” options. Checking the ALARM(motion record), GENERAL (always record) and NO RECORD boxes will allow you to further customize options foryour scheduled recordings.If you decide that you do not wish to customize your system recording schedule, the Default recording schedule is asfollows:Hr 01:00 am - 07:59 am: No recording (Not recording)Hr 08:00 am - 18:59 pm: Normal recordingHr 19:00 pm - 00:59 pm: Alarm recording (Record on activity or alarm only)5.2.3: Network SetupThe right click menu in the Main Interface mode (Picture 3) allows youto access the Main Menu interface (Picture 4). To set up the Networksettings of your DVR, go to [Main Menu] [Network Set] to enter into[Network Setup] menu (Picture 7).From the Network Setup menu (Picture 7), you can choose yourNetwork Type (DHCP, PPPoE, or Static), Port and Web Port (80 and9000 by default) from a drop down list. Once you have configuredthese, you can then view the DVR remotely over a network or theinternet.5.2.3.1: DHCPWhen selecting DHCP as your Network type, your Router will allocatea DVR IP address automatically once you exit the Network Setupmenu. Write down the address assigned by your Router. It isrecommended you switch to the “Static” Network Type and enter theaddress information here to avoid any discrepancies that might occurin the event your Router auto generates a different address in thefuture.5.2.3.2: PPPoEWhen selecting PPPoE as your Network type, you will need to input auser and password provided by your internet service provider. Onceyou have obtained those settings from your internet service provider,you will need to set your web port as illustrated in Picture 8.(Picture 7)