Q-See QR404 User Manual

Q-See QR404 User Manual Manual pdf 17 page image

QR404 User Manual13an IP address and be directed to whatever the current dynamic IP address is, so that you can always access the DVRby entering the same address. This DVR also supports the DDNS service provided by dyndns. You can get moreinformation on how to use these services from the myq-see.com or www.dyndns.com website.5.2.3.4: Port ForwardingTo access the DVR from a remote computer over the internet you will need to forward port 80 and port 9000 of theRouter the DVR is attached to, to the IP address of the DVR. You can get instructions on how to do this for mostpopular routers by going to www.portforward.com. Once there, click on the orange “Routers” hyperlink in the secondparagraph as shown in Picture 12. Find the link to the brand and model of your router from the list of manufacturersand click the “next button”. From there, click on the orange “Default Guide” link (BLUE box in Picture 13). This willtake you to the port forwarding instructions for your router.When you access the DVR from a remote computer you also need to use a different address in the Internet Explorerbrowser window. Instead of entering the IP address of the DVR you need to enter the public IP address of the routerthe DVR is attached to. You can get this address by going to www.myipaddress.com from a computer that is attachedto the same router as the DVR. This website will display your address as illustrated in Picture 14. The examplebelow shows an IP Address of 76.254.183.54. Please make sure to take note of the address that you obtain for yourown Router and use it accordingly.(Picture 14)(Picture 12) (Picture 13)