QMS Print System QMS 1725E Getting Started Manual

Also see for 1725E: Supplementary guide Reference

QMS Print System QMS 1725E Getting Started Manual Manual pdf 57 page image

Installing the Software4-5Connecting to an Ethernet Networkinstallation software, anddestination is the full pathname ofthe directory in which the software will be installed (forexample, a:install a: c:\crownadm↵).» Note: You cant install the utilities by copying files from the disks. Youmust run the installation program.3 When the installation is complete, remove the disk from thedisk drive and store it in a safe place.4 Skip to “Configuring the Interface,” later in this chapter.Macintosh System1 With the Macintosh on, insert the CrownAdmin for Macin-tosh disk in the disk drive.2 If necessary, double-click the Utilities disk icon to open thedisk window.3 Copy the CrownAdmin file by dragging the CrownAdminicon from the Utilities window to the Macintosh hard disk.4 When the installation is complete, remove the disk from thedisk drive and store it in a safe place.5 Skip to “Configuring the Interface,” later in this chapter.OS/2This is a two-part procedure. Some of the utilities are installed on theprint server and others on the workstation.» Note: For information on installing the utilities directly on the workstation,(bypassing the print server and printing directly to the printer), see theQMS CrownNet Interface System Administrators Guide.Print Server1 At the LAN Manager/LAN Server print server, log into the net-work as the system administrator.2 Insert the CrownNet Manager for OS/2 disk in the disk drive.