QMS Print System QMS 1725E Getting Started Manual

Also see for 1725E: Supplementary guide Reference

QMS Print System QMS 1725E Getting Started Manual Manual pdf 65 page image

Configuring the Network4-13Connecting to an Ethernet NetworkTCP/IP1 If necessary, in the Administration/Communications/Network2/CrownNet/TCPIP/Internet Address menu, enter theprinter’s Internet address.The factory default Internet address is 161.033.128.024.2 If necessary, in the Administration/Communications/Network2/CrownNet/TCPIP/Default Router menu enter the Internetaddress of the default router.The factory default router address is 000.000.000.000.3 If necessary, in the Administration/Communications/Network2/CrownNet/TCPIP/Subnet Mask menu enter the printer’ssubnet mask.The default subnet mask is 000.000.000.000. This settingprovides automatic sensing of gateways. If you identify asubnet mask, automatic sensing is disabled.4 Continue with “Configuring the Network.”Configuring the NetworkEtherTalk1 With the Macintosh running, from the Apple menu, open theChooser.2 Click the LaserWriter icon.3 If your network has more than one zone, click the name ofthe default zone.The printer name is automatically displayed in the defaultzone.4 Select the name of the printer.