QMS Print System QMS 1725E Getting Started Manual

Also see for 1725E: Supplementary guide Reference

QMS Print System QMS 1725E Getting Started Manual Manual pdf 59 page image

Installing the Software4-7Connecting to an Ethernet Network9 In the Installation of CrownNet Ports dialog box, select theappropriate printer port(s) and choose Install.The selected ports are displayed in the CrownNet Managerwindow.» Note: Port names are either the default or those chosen in InterfaceConfiguration, later in this chapter.WorkstationUse this procedure to install the CrownAdmin software on the work-station. CrownAdmin lets you use Remote Console; it is not neces-sary for printing via OS/2.1 With the workstation running, insert the disk containing theCrownAdmin software for DOS or Windows in the disk drive.2 Open a session under OS/2:n OS/2 version 1.x—Open a DOS Window session.n OS/2 version 2.x—Open a WIN-OS/2 session.3 Refer to the DOS or Windows information elsewhere in thissection, “Software Installation,” for further instructions.» Note: You cant install the utilities by copying files from the disks. Youmust run the installation program.4 When the installation is complete, remove the disk from thedisk drive and store it in a safe place.5 Skip to “Configuring the Interface,” later in this chapter.UNIX» Note: The procedure described here is for UNIX Host Software installationfrom disk. If you have a cartridge or tape, refer to the installationdocumentation accompanying the cartridge or tape.1 Log on the UNIX system as root.