QSC touchmix-30 pro User Manual

Also see for touchmix-30 pro: Quick start guide Technical notes User manual User manual Windows driver manual

Contents

QSC touchmix-30 pro User Manual Manual pdf 62 page image

541001108-01-ASub Nroup − PEQControls and displays the settings for the Sub Groupparametric equalization.1. EQ tab – Selects the PEQ screen.2. PEQ In/Out switch – Engages / disengages theequalizer.3. RTA On button – Turns the RTA (Real-timeAnalyzer) on and off.4. Simple button – Hides the Low Cut, High Cut,Frequency, and BW controls. Does not effectexisting settings.5. Reset button – Sets all EQ controls to factorydefault values.6. RTA graph – Displays the amplitude of the channelsignal in 1/3 octave bands. Peak hold is displayedonly on tablet devices.7. Parametric EQ graph – A graphic representationof the equalization curve based on the EQ settings.When the EQ is engaged, the trace changes fromblack to white.• EQ graph vertical scale – Represents audiolevel from -20 dB to +20 dB.• EQ graph horizontal scale – Representsfrequency from 20 Hz to 20 kHz.8. EQ Handles – Touch, hold, and drag to change theFrequency and Gain of the associated EQ band. Thefrequency band button must be engaged to see the EQ Handles.9. Low and High Cut Filter buttons – These filters cut frequencies below or above the frequency set by the corresponding Freq control.10. Low and High Shelf Filter buttons – Changes EQ Band 1 and Band 6 from parametric filters to shelving filters. When a shelf filter is engaged,the Bandwidth control is not available.11. Frequency Bands 1 - 6 In/Out – Engages / disengages the associated parametric EQ band.12. Nain knob – Adjusts and displays the gain at the frequency setting of the associated EQ band. Range of -15 dB to +15 dB.13. Freq knob – Adjusts and displays the center frequency of the associated EQ band. The range is 20 Hz to 20 kHz for all bands. If the Shelving filteris engaged, the Freq control sets the knee frequency of the shelf filter.14. Q knob – Adjusts the bandwidth of the associated EQ band. When the Shelf Filter is selected, the Bandwidth control is hidden.15. Freq knob (Low and High Cut) – Sets the knee frequency of the low and/or high cut filter as measured from a point 3 dB below 0 or unity.16. Prev / Next buttons – Navigates to the next or previous sub group. The buttons cycle through the Input, Playback, Record, and FX channels,then loops back to Input 1.17. Sub Nroup controls – Output controls for selected Sub Group.18. Main Channel controls – Output controls for the Main L/R outputs. See Channel Controls topic.PressHomeTouch a SubGroup BankTouch aSub GroupTouch theEQ TabLAF∞CueL C RSub1105u5102004010MainL/R105u5102004010Mute MuteOverview Comp FX Auxes Presets SetupFreqLow CutHzHzFreqHzdBHigh CutGainFreqQGainFreqQHzdBGainFreqQHzdBGainFreqQHzdBGainFreqQHzdBGainFreqQHzdBLR1 23 45 67 8DefaultInputs 1-8Main MixL/RJoe’s EarsAux 1Aux 2Aux 2Aux 3Aux 3Aux 4Aux 4Aux 5Aux 5Aux 6Aux 6Aux 7Aux 7Aux 8Aux 8Aux 9Aux 9Aux 10Aux 10Aux 11Aux 11Aux 12Aux 12Aux 13Aux 13Aux 14Aux 14Sub 1RTA On Simple Reset MainCueScene:-5-15-30-45-60-5-15-30-4531.53 421EQ20HzPEQ Out In00.0080.01.000.002001.00120 8.0KSub 1 EQSub Groups5 60.005001.000.001.00k1.000.003.0k1.000.008.0k1.00CF2 3 417161110 1069151258131491517 18Prev Next21435 6