QSee QT SERIES User Manual
                                                                           | |
Contents
| 
68 69FRONT PANEL REAR PANELQT7116ITEM NAME FUNCTION1 SHUT DOWN Press and hold to begin the shutdown process. the harddrive(s) will spin down and the DVR will display a messageletting you know when it is safe to turn off the power using theswitch on the rear panel (Item #16 on the next page).2 CHANNEL LEDINDICATORSShows the connection status of each camera.3 VIDEOPLAYBACKKNOBFor use in Video Playback mode. Allows fine adjustment ofvideo playback speed.4 NUMBERS For selecting channels. Use the 0/10+ button for selectingchannels 10-165 LEDINDICATORSShow status of power, hard drive, record, etc.6 INFO Opens the Information menu7 IR RECEIVER Receives signals from remote control8 ENTER Confirm selection9 RECORD Begins manual recording on all channels10 MENU Opens MAIN MENU11 VIDEOPLAYBACKCONTROLSFor use in Video Playback mode. Pressing the magnifyingglass icon enters the Video Search mode.12 AUDIO/+ Turns audio on or off. Increase the value in SETUP13 PTZ/- Opens PTZ control menu. Decreases the value in SETUP14 DIRECTION/MULTISCREEN1. Navigate through on-screen options2. Change screen display mode between 1, 4, 9 and 16channels15 USB USB port to connect USB flash or external hard drives toupdate firmware or back up recordings16 BACKUP Opens BACKUP window.ITEM NAME FUNCTION1 VIDEO IN Video input from up to 16 HD SDI cameras2 CVBS (VideoOut)Video output for connecting to TV (BNC) or monitor3 AUDIOOUTPUTConnection for audio output – connect to an amplified speaker4 MIC IN RCA connection for using microphone. Requires speaker(s)located with camera(s).5 AUDIO IN 16 channel audio input for cameras equipped with audio. Dongleis located in accessory box.6 ESATA Ports for connecting two external SATA hard drives for backup.7 FAN Cooling fan exhaust port. This should not be blocked.8 DC +12V Power input9 ALARM IN Input ports for 16 alarms.10 HDMI HDMI video output11 VGA PORT Video output for connecting to monitor at least 19” in size12 ALARM OUT Four output ports for external alarms13 LAN Network (ethernet) port14 USB PORT Connect USB mouse15 PTZ RS485BLOCKConnections for Pan-Tilt-Zoom speed dome cameras. Y = “+” Z= “-”16 POWERSWITCHUse to turn on the DVR as well as to turn off after poweringdown from within the GUI1 32 1084 65 7 911 12 14 1613 151 2 3 4 5109 1211 14 1613 156 87 |
Related manuals for QSee QT SERIES
manualsdatabase
Your AI-powered manual search engine