UM-PRORUNNER_Mk5-1.2-EN-US 51Installation6.3.3 Vertical transport < 1400 kg1. Check the type plate for the exact weightof the machine.2. Use a suitable hoisting system thatcomplies with local regulations.3. Attach a suitable hoisting belt or hoistingchain (A) to the lifting eye (B).4. If necessary, put the machine in thevertical position. Make sure that themachine does not tip over after it has beenput in the vertical position.5. Make sure that the bottom side of themachine (C) is not dragged along theground during transport.6.3.4 Vertical transport > 1400 kg1. Check the type plate for the exact weightof the machine.2. Use a suitable hoisting system (A) thatcomplies with local regulations.3. Install a yoke (D) onto the upper beam (B).4. Attach a suitable hoisting belt or hoistingchain to the hoisting eyes (C) on the yoke.5. Follow the rules for lifting using a yoke.6. Make sure that the bottom side of themachine is not dragged along the groundduring transport.DANGER• The hoisting eyes (B) are suitable for a maximum weight of 1400 kg.Machines up to 7 - 8 m high can be moved using the hoisting eyes.• If the weight to be moved is more than 1400 kg, use a suitable liftingdevice (yoke). Refer to section 6.3.4.BCABCCNoteThe hoisting eyes on the lift (C) are suitable for a maximum weight of 1400 kg.Refer to section 6.3.3 if the weight to be moved is less than 1400 kg.ABCC D
