Maintenance vertical conveyor74 UM-PRORUNNER_Mk5-1.2-EN-US7.8.5 Replace the wheel of the leveler1. Remove the guide. Refer to section 7.8.4.2. Loosen the bolt.3. Replace the wheel (A) of the leveler (B).4. Replace the bolt and tighten the bolt with atorque of 30 Nm.5. Place and tighten a lock nut (C) at the bolt.6. Re-lubricate the running surfaces of thewheels with Bel-Ray No-Tox HD Grease(62270, 62280) or equal.7.8.6 Replace the curve plate - bottom sideUninstall the curve plate1. Remove the side covers (A).2. Remove the curve plate (A).NotePay attention to the torque.ABCAAA
