Maintenance belt conveyor90 UM-PRORUNNER_Mk5-1.2-EN-US9.2 Preventive maintenance schedule, belt carrier9.2.1 Daily maintenance/i9.2.2 Weekly maintenance/iItem Task Action when required by thecheckGuards and covers Check for visible damage. Replace damaged guards and /or covers.Check if the mounting materialsare present and have been cor-rectly placed.Place the mounting materials orcorrect the way in which theyhave been fastened.Entire machine Check for visible dirt. Clean the machine. Refer tosection 9.3.Item Task Action when required by thecheckConveyor belt Check for visible damage to thesurface and sides.Replace the conveyor belt.Refer to section 9.7.Clean. Refer to section 9.3.Driving drum Check for damage of the run-ning surface and bearings.Replace the driving drum. Referto section 9.7.Clean. Refer to section 9.3.Check for running sounds. Lubricate the bearings in thedriving drum. Refer to section9.4.1.Timing belt Check for damage. Replace the timing belt Refer tosection 9.7.Check the alignment. Align the pulleys. Refer to sec-tion 9.7.Clean. Refer to section 9.3.Pulley Check for dirt. Clean. Refer to section 9.3.Check for visible deformation. Replace the pulley. Refer tosection 9.7.Make sure the is running freelyand smoothly.Replace the pulley. Refer tosection 9.7.Check the alignment. Align the pulleys. Refer to sec-tion 9.7.
