Qlogic 8200 Series User Manual

Also see for 3200 Series: User guide User guide User guide

Contents

Qlogic 8200 Series User Manual Manual pdf 100 page image

2–Configuring NICNIC Partitioning (NPAR)2-54 SN0054671-00 BTo set the QoS:1. Expand a 8200 and 3200 Series Adapters node in the QConvergeConsolesystem tree.2. Expand the physical Port 1 node and select the NIC port. The content panedisplays two additional tabs that are not available on NIC ports for physicalPort 2.3. Select the NIC Partitioning tab, and then click the Management sub-tab.The NIC Partitioning Management General page displays configurationdetails that apply to the selected NPAR (Figure 2-31).Figure 2-31. NIC Partitioning—General Management Page4. Click the down arrow and select the NIC partition (NPAR0, NPAR1, NPAR2,or NPAR3) from the drop-down list.Information and configuration fields related to the selected NIC partitioninclude: Default MAC Address. The MAC address set at the manufacturer. Location. The logical location in the system: PCI bus number, devicenumber, and function number.NOTE:The NIC Partitioning page applies to NIC ports only for NPAR-enabled 8200and 3200 Series Adapters.