2–Configuring NICNIC TroubleShooting/Diagnostics2-76 SN0054671-00 B Link Test verifies that the port is linked, meaning that the port has a goodcable attached to the port and that other end of the cable is connected to anoperational Ethernet port, either another NIC port or a network device, suchas a switch. Register Test verifies the NIC register read and write.Linux Diagnostic Test MessagesTest information and PASS or FAIL messages are displayed for each of the testslisted in “Linux Diagnostic Test Descriptions” on page 2-75.QLogic Device Windows Property Page DiagnosticsThis section covers the following information for user diagnostics for Windows NICdriver management applications: “Running Windows User Diagnostics” on page 2-76 “Windows Diagnostic Test Descriptions” on page 2-81 “Windows Diagnostic Test Messages” on page 2-83Running Windows User DiagnosticsYou can run user diagnostics using either the QConvergeConsole GUI or the CLI.To run user diagnostics in the GUI:1. Access the Windows Control Panel, and then open the Device Manager.2. In the Device Manager, right-click the QLogic 10Gb Ethernet adapter, andthen on the shortcut menu, click Properties.NOTE:Information on installing and starting the GUI version of QLogic'sQConvergeConsole utility is provided in the QConvergeConsole User'sGuide. All procedural information for that utility is covered in theQConvergeConsole Help System.
