2–Configuring NICTeaming/BondingSN0054671-00 B 2-29To remove an adapter from a team:1. On the Team Management property page, right-click the adapter to beremoved from the team.2. On the shortcut menu, click Remove from Team.3. At least two adapters must be present in a team. If an adapter is no longerrequired to be a member of a team, it can be removed from the team.To change a team property:For the VLAN and teaming solution to work correctly, the properties of all teamedadapters and adapters with multiple VLANs must remain synchronized with theteam properties. Ensure that you change the properties of a team and an adapterwith VLANs only on the Team Management page.1. On the Team Management page, in the right pane under Team Data,expand the Properties list.2. Double-click the team property you need to change.3. In the Advanced Team Properties dialog box (Figure 2-13), specify a newproperty value, and then click OK.Figure 2-13. Modifying Advanced Team PropertiesNOTE:A team must include at least one QLogic Adapter. A QLogic Adapter isallowed to be deleted from a team only if it is not the last QLogic-teamedAdapter.
