1–Product OverviewMulti-boot Image for 10Gb Converged Network Adapter—CNA Function ConfigurationSN0054671-00 B 1-7QLflash Command Line OptionsThe executable file QLflash.exe is used by the UPDATE.BAT file to update youradapter multi-boot code. The application QLflash.exe may be used to read,write, or verify either the multi-boot image or the NVRAM on the adapter.The following paragraphs describe the command line options available with thisutility. Use of QLflash will modify the way your adapter operates, and it must beused with extreme caution.Certain features (that is, the NVRAM options) may require additional data.Files and passwords are not provided in this file.QLflash OptionsQLflash.exe <1...N | ALL> [options]/SLTSLT: Sets the application to silent modeUse application return code for success or failure/SIL=filename.extSIL: Load multiflash image from file/PRV | /VPP | /PRNPRV: Print firmware versionsVPP: Print VPD contentsPRN: Print MAC addresses and worldwide port name (WWPN)/CFU=filename.ext | /CFS=filename.ext | /CFC=filename.extCFU: Flash board configuration from fileCFS: Save board configuration file (need template file BRDCFG.DAT)CFC: Compare board configuration to a binary file/NVU=filename.ext | /NVS=filename.ext | /NVC=filename.extNVU: Flash NVRAM from fileNVS: Save NVRAM to file (need template file NVRAM.DAT)NVC: Compare Flash to NVRAM file/UIL=filename.ext | /UIS=filename.ext | /UIC=filename.extUIL: Flash user information data from fileUIS: Save user information data to fileUIC: Compare user information data to a binary file
