A – Fast Fabric Quick Install ChecklistInstalling and verifying Firmware on the IB ChassisA-2 D000006-000 Rev AQA.2Installing and verifying Firmware on the IB Chassis1. All Chassis connected to management network.2. Unique IP address configured for each chassis.3. Unique name configured for each chassis.4. Administrator passwords configured the same on all chassis.5. Fastfabric.conf file reviewed.6. /etc/sysconfig/iba/chassis file created listing all chassis.7. Chassis verified via Ethernet ping.8. Chassis firmware updated.9. Any additional chassis configuration completed. Such as:a. configuration of NTPb. configuration of timezonec. configuration of a syslog serverA.3Installing and Configuring the Subnet Manager1. Subnet Manager installed/enabled.2. Subnet Manager started and running.A.4Installing and Verifying Firmware on the IB Switches1. Fastfabric.conf file reviewed.2. /etc/sysconfig/iba/ibnodes file created listing all switches and theirdesired names.3. Switch firmware updated.4. Any 9024FC switches in the IB Management Node path to fabric updated.A.5Install Infiniband on the Remaining Servers1. Fastfabric.conf file reviewed.2. /etc/sysconfig/iba/hosts file created listing all hosts except IBManagement Node.3. Verify Hosts via Ethernet ping.4. If using RSH/RCP, verify that is RSH/RCP configured.
