3 – Getting StartedD000006-000 Rev A 3-5QSilverStorm Technologies Inc. InfiniBand 4.1.1.0.15 Software1) Show Installed Software2) Reconfigure IP over IB3) Reconfigure Driver Autostart4) Update HCA Firmware5) Generate Supporting Information for Problem Report6) Host Setup via Fast Fabric7) Host Admin via Fast Fabric8) Chassis Admin via Fast Fabric9) Externally Managed Switch Admin via Fast Fabrica) Uninstall SoftwareX) ExitIn the above menu, items 6-9 represent the Fast Fabric menus. The operation ofthis menu is the same as the INSTALL and iba_config functions documented in theQuickSilver Fabric Access Users Guide. Pressing a key 1-9 or a will invoke thegiven submenu. Pressing X will exit the menu system.Selection of a Fast Fabric menu (6-9) will present a submenu similar to the following:SilverStorm Technologies Inc. IB Host Setup Menu (4.1.1.0.15)Fast Fabric Host List: /etc/sysconfig/iba/hosts0) Edit Config and Select/Edit Hosts Files [Perform]1) Verify Hosts via Ethernet ping [Perform]2) Verify rsh/rcp Configured [ Skip ]3) Setup Password-less ssh/scp [Perform]4) Copy /etc/hosts to all hosts [ Skip ]5) Show uname -a for all hosts [Perform]6) Install/Upgrade InfiniServ Software [Perform]7) Configure IPoIB IP Address [Perform]8) Build MPI Test Apps and Copy to Hosts [Perform]9) Reboot Hosts [Perform]a) Refresh ssh Known Hosts [Perform]b) Rebuild MPI Library and Tools [ Skip ]c) Run a command on all hosts [ Skip ]d) Copy a file to all hosts [ Skip ]e) View ibtest result files [ Skip ]P) Perform the selected actionsN) Select NoneX) Return to Previous Menu (or ESC)The submenus typically present operations in the typical order they would be usedduring an installation. Pressing the keys corresponding to menu items (0-e in theexample above) will toggle the Skip/Perform selection for the given item. As shownin the example above, more than 1 item may be selected. Once the desired set of
