5 – Detailed Descriptions of Command LineToolsD000006-000 Rev A 5-17QFor operations against chassis use of the -S option is recommended. This avoidsthe need to keep the password in configuration files.5.2.5captureall(Switch and Host): Captures supporting information for a problem report fromall hosts or SilverStorm IB chassis and uploads to this systemUsage:captureall [-Cp] [-f hostfile] [-F chassisfile] [-h 'hosts'][-H 'chassis'] [-d upload_dir] [-S] [file]-C - perform capture against chassis, default is hosts-p - perform capture in parallel[for a host capture this only affects the upload phase]-f hostfile - file with hosts in cluster, default is/etc/sysconfig/iba/hosts-F chassisfile - file with chassis in cluster, default is/etc/sysconfig/iba/chassis-h hosts -a list of hosts to perform a capture of-H chassis - a list of chassis to perform a capture of-d upload_dir - directory to upload to, default is uploads. If not specified,the environment variable UPLOADS_DIR will be used. If that is not exported,the default (./uploads) will be used.-S - securely prompt for password for administrator on a chassisfile - name for capture file [.tgz will be appended]When a host captureall is performed, iba_capture will be run to create thespecified capture file within ~root on each host (with the .tgz suffix added).The files will be uploaded and unpacked into a matching directory name withinupload_dir/hostname/ on the local system. The default file name ishostcapture.When a chassis capture all is performed, the chassis capture CLI commandwill be run on each chassis and its output will be saved toupload_dir/chassisname/file on the local system. The default file nameis chassiscapture.For both host and chassis capture, the uploaded captures will be combined intoa tgz file with the file name specified and the suffix .all.tgz addedHost Capture Examples:captureall
