3–Configuring CHAPDiscovery Session—Uni-directional CHAPISR654601-00 D 3-3Discovery Session—Uni-directional CHAPFollow this procedure to configure a uni-directional CHAP used during a discoverysession.To configure a uni-directional CHAP in a discovery session:1. Do not enable CHAP on the ISCSI port.2. Execute the initiator add command as follows:a. Add the initiator that is about to perform the discovery.b. Enable the CHAP for this initiator.c. Create a secret (for example, secret_initiator).d. Use Set Chap to update the initiator’s CHAP settings.3. Go to the MS Initiator.4. Click Discovery.5. Click Add.6. Type the address of the iSCSI port of the router.7. Click Advanced.8. Select Chap Login Information.9. In Target Secret, type the secret (secret_initiator) you created in Step 2.10. Click OK.11. Click OK.The initiator completes the discovery.
