1–CLI UsageUnderstanding the Guest Account1-2 ISR654601-00 DTo log on to a switch through the serial port:1. Configure the workstation port with the following settings: 115200 baud 8-bit character 1 stop bit No parity2. When prompted, enter an account name and password.Understanding the Guest AccountRouters come from the factory with the following account already defined:This guest account provides access to the router and its configuration. Afterplanning your router management needs, consider changing the password for thisaccount. For information about changing passwords, see the passwd command(page 2-30).The guest account is automatically closed after 15 minutes of inactivity.The initial login opens at the chassis level. From the chassis level, select theblade to be managed. For example:iSR6200 login: guestPassword: **************************************************************** ** ISR6200 ** *******************************************************iSR6200 #> helpadmin [ begin | end | start | stop | cancel ]blade [ 1 | 2 ]exithelphistorylogoutquitAccount name: guestPassword: password
