4 – Managing SwitchesUsing Call Home59235-02 A 4-35LTable 4-9 lists the entries in the Call Home Setup dialog.Table 4-9. Call Home Setup EntriesEntry DescriptionPrimary SMTP: (active) The "(active)" indicates the Primary SMTP (Simple MailTransfer Protocol) is the SMTP server that CallHome isgoing to try to use when transmitting Email messages.CallHome operates as an SMTP client, or more correctly,and SMTP sending agent.After any system configuration, the Primary SMTP serverwill always become the active SMTP, provided it isenabled and has a non-default address defined (0.0.0.0 isthe default).Primary SMTP ServerAddress:This is the IP address of the primary (first) SMTP server.Primary SMTP Server Port: This is the service port number that the primary SMTPserver is listening on to accept connections from SMTPsending agents.Secondary SMTP: The Secondary SMTP is the second SMTP server. If theprimary SMTP is not enabled/defined, or if there was afailure in communicating with the primary SMTP server,the Secondary SMTP server will become the (active)SMTP server - the one used by Call Home for the nextattempt to transmit Email.Secondary SMTP ServerAddress:The IP address of the secondary (second) SMTP server.Secondary SMTP ServerPort:The service port number that the secondary SMTP serveris listening on to accept connection from SMTP sendingagents.Contact Email Address: The Email address of the point-of-contact for the switch.This Email address will be included in the text of Emailmessages using the 'FullText' format under the section for"Contact Information."Phone Number: The phone number of the point-of-contact for the switch.This value will be included in the text of Email messagesusing the 'FullText' format under the section for "ContactInformation."Street Address: The address of the point-of-contact for the switch. Thisvalue will be included in the text of Email messages usingthe 'FullText' format under the section for "Contact Infor-mation."
