5–Validation Methods for DCB and FCoEValidation Step 5—ETS Verification5-20 51031-00 A7. Use Expert to analyze the capture, and verify the following: No error occurs on FCoE traffic Link throughput per priority in MBps (Figure 5-20) Each traffic class can still generate I/O at its ETS setting when the linkis saturated. Exchange completion timeFigure 5-20. Throughput per PriorityValidation ResultsTable 5-3 lists the port settings to verify the ETS setup. ETS allocates 50 percentof the bandwidth to FCoE and 50 percent of the bandwidth to other traffic. Theother traffic is regular TCP traffic.Table 5-3. Analyzer Port Setup Reference for Monitoring LinksPorts Direction DescriptionStorage (1,1,1) Storage > Switch FCoE storage read dataSwitch (1,1,2) Switch > Storage FCoE storage write dataServer (1,2,1) Server > Switch Server I/O out (write)Switch (1,2,2) Switch > Server Server I/O in (read)
