5–Validation Methods for DCB and FCoEValidation Step 7—Virtualization Verification51031-00 A 5-29Validation Step 7—Virtualization VerificationThis validation step compares the performance of virtual machines on a singlehost with performance on multiple hosts. The test runs one iSCSI initiator in onevirtual machine, and one FCoE initiator in another virtual machine as shown inFigure 5-30.Figure 5-30. Setup for Verifying VirtualizationValidation Process1. Set up two virtual machines on one server, and install MLTT on each virtualmachine.2. Set up ETS.3. Configure the Analyzer to capture any frame.4. Use MLTT to set up remote control from one virtual machine, so that you cancontrol both virtual machines from one MLTT interface.5. Use MLTT to map iSCSI storage and Fibre Channel storage devices forindividual virtual machines.4Gbps10Gbps
