1–IntroductioniSR6200 Router BladesISR651101-00 E 1-13Figure 1-12. Ethernet Management PortA management workstation can be a Windows®, Solaris®, or a Linux® workstationthat configures and manages the router. You can manage the router over anEthernet connection using either SANsurfer Router Manager, the CLI, or SNMP.The management Ethernet port has two LEDs: The link status LED (green) lights up continuously when the port establishesan Ethernet connection. The activity LED (green) lights up when the port transmits or receives dataover the Ethernet connection.Serial PortThe iSR6200 router is equipped with an RS-232 serial port for maintenancepurposes. Figure 1-13 shows the serial port location, which is labeled IOIOI. Youcan manage the router through the serial port using the CLI.Figure 1-13. Serial PortThe serial port connection requires a standard eight-wire Ethernet cable and thesupplied dongle to convert the Ethernet RJ45 connector to a female DB9connector.MGMT IOIOI FC1 FC2 GE1 GE1GE4 GE3 iSR6240Intelligent Storage RouteriSR6200 System10GbE1 iSR6250Intelligent Storage Router10GbE2Activity Link StatusMGMT IOIOI FC1 FC2 GE1 GE1GE4 GE3 iSR6240Intelligent Storage RouteriSR6200 System10GbE1 iSR6250Intelligent Storage Router10GbE2Serial Port
