Quadra-Fire • Village Collection Electric Fireplace • 4030-782 Rev D • 11/05 15Fire Risk• Do not operate heater before reading andunderstanding operating instructions.Failure to operate heater properly maycause fire.WARNINGA. Manual ControlsAccess Controls• Controls are located behind the lower grille panel. Toaccess the controls, lift up on the lower grille panel androtate it forward.Function of Manual Controls• Main Power Switch- Main power switch is used to provide power to allcontrols. When the main power switch is on, the heateris turned on by the manual control on the heater,the remote control (optional) and/or the wall switch(optional).- When the main power switch is off, the manualswitches, remote control and wall switch will notwork.MOTION INTENSITY THERMOSTATHEATER MAINPOWER LEARNMOTIONINTENSITY THERMOSTATHEATER/BLOWER ASSEMBLY SWITCHMAIN POWER SWITCHLEARNFigure 8.1 Dashboard Controls- It is recommended that during long periods of non-usage that the main power switch is turned to the “OFF”position.• Flame/Ember Bed Intensity Control- Turn the control knob clockwise to increase theintensity.- Turn the control knob counter-clockwise to reduce theintensity.• Flame/Ember Bed Motion Control- Turn the control knob clockwise to increase themotion.- Turn the control knob counter-clockwise to reduce themotion.• Heater/Blower Assembly Switch- The heater/blower assembly will operate only if theswitch is turned on.- When the heater/blower assembly switch is in the“OFF” position, the heater can operate with flame butno heat.8 Operating Instructions