Qualcut 3300ST Operating Instructions Manual
                        | |
Contents
| 
!POWER PRODUCTS LLC. 3300ST10.WARNING: Please make sure the cutting head hasbeen assembled correctly before use.1. To fit the nylon cutting head, remove the shield after releasingthe nut. Still holding the flange, place the nylon cutting headon the shaft and rotate counterclockwise (H). The nyloncutting head is now fitted.Fitting the Nylon Cutting Head2. To remove the nylon cutting head, use screwdriver to holdflange and rotate clockwise.H1. To fit the blade, take the outer flange off after releasing themain nut, then put the blade, outer flange shield and nutaccording to priority (I). Note the blade rotation direction (J).Use screwdriver to hold flange and tighten nut counter-clockwise. Ensure the nut is well tightened.Fitting the Blade2. To release the blade, use screwdriver to hold flange andrelease nut, the blade than then be removed.IJPETROL OIL1 litre 25ml2 litres 50ml3 litres 75ml4 litres 100ml5 litres 125ml!!Mixing the fuelFUEL & LUBRICATIONWARNING: Petrol is extremely flammable andexplosive. A fire or explosion from petrol will burnyou and othersThis product is powered by a 2 stroke engine and requires pre-mixing petrol and 2 stroke oil.The oil mix should be 40:1. Never mix petrol and oil directly inthe engine tank.Use unleaded petrol intended for motor vehicleuse with anOctane rating of 87 ( [R + M] / 2) or higher. Purchase fuel froma reputable fuel supplier.Use the mixing container provided to mix the oil and petrol inthe correct quantities.Mix only enough fuel for your immediate needs.Fuel should not be stored for more than 30 days.Follow these steps to mix the fuel:1. Use the container provided for mixing fuel.2. Mix the 2 stroke engine oil with unleaded petrol in thecontainer provided at the rate of 40 parts petrol to 1 part oil.3. Mix the fuel thoroughly and also each time before re-fuelling.4. Mix in small quantities. Do not mix more fuel than you expectto use within a 30 day period.5. Store fuel only in a clean, safe, approved container for petrol- DO NOT store fuel in the fuel mixing bottle provided.WARNING: Always stop the engine before fillingthe tank. Never add fuel to a machine with a runningor hot engine.+= 40:1 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine