Qualcut 3300ST Operating Instructions Manual
                        | |
Contents
| 
POWER PRODUCTS LLC. 3300ST12.Balancing the Brushcutter on theShoulder Harness1. Hang the machine on the harness hook, and seehow it balances.2. Adjust the shoulder harness, the harness hanger on theframe pipe, and the loop handle or U-type handlebar, so thehandle or handlebars are in a comfortable operating position,and the trimmer hangs with its cutting attachment a fewinches above the ground.!STARTING THEBRUSH CUTTERStarting the product depends on whether the engine is cold orwarm.WARNING: The recoil starter can be damaged byabuse.- Never pull the starter cord to its full length.- Always engage the starter before cranking theengine.- Always rewind the starter cord slowly.Once the machine has been set up properly, start the engineas follows:1. Press the fuel primer bulb 8 times.2. Turn the engine switch to the ON position ( l ).3. Put the choke lever into the CLOSED position (P).4. Pull the recoil starter handle until it engages, then pull briskly(Q). Repeat until the engine fires and is running.NOl = ONO = OFFP= Choke Closed |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine