Chapter 5 Running Diagnostic ProgramsRunning the Barcode Scanner TestSun StorEdgeô L25 Tape Library and Sun StorEdgeô L100 Tape Library Userís Guide 87Running the Barcode Scanner Test 5The Barcode Scanner test causes the bar code scanner to do acomplete inventory of the library, scanning each magazine locationfor the presence of a valid bar code label.To run the Barcode Scanner test:1 Access the Diagnostics Menu screen (see Accessing theDiagnostics Menu Screen).2 Press the Up and Down buttons to select General.3 Press Select.The GUI displays the Diags: General screen (see figure 48).Figure 48 Diags:General Screen4 Press the Up and Down buttons to select Barcode Scanner.5 Press Select.The GUI displays the Diag: Barcode screen, which prompts youto set the cycle count (see figure 49). The rightmost number ishighlighted.
