Chapter 5 Running Diagnostic ProgramsRunning the Move Location TestSun StorEdgeô L25 Tape Library and Sun StorEdgeô L100 Tape Library Userís Guide 93the selected number of test cycles. The home location depends onwhether the destination is a tape drive or a magazine slot:ï If the destination is a tape drive, the home location is slot 1 ofthe level 1 left magazine.ï If the destination is a magazine slot, the home location is tapedrive 1.To run the Move Location test:1 Access the Diagnostics Menu screen (see Accessing theDiagnostics Menu Screen on page 85).2 Press the Up and Down buttons to select General.3 Press Select.The GUI displays the Diags: General screen (see figure 48 onpage 87).4 Press the Up or Down buttons to select Move Location.5 Press Select.The GUI displays the Diag: Move-Location screen (seefigure 54).Figure 54 Diag:Move-Location Screen
