Quantum ValueLoader User Manual
Also see for Quantum ValueLoader: Warranty
                                                                                          | |
Contents
| 
Chapter 1 Installing the ValueLoaderUnpacking the ValueLoaderValueLoader LTO-1/LTO-2 Tape Autoloader User Manual 7Unpacking the ValueLoader 1Before you begin, clear a desk or table so you can unpack theValueLoader. You also need to select an open 2U computer rack locationor a desktop location near the server that is to be the host for theValueLoader.Unpack and inspect the ValueLoader for shipping damage by doing thefollowing:1 Clear a table or desk so that you have room to unpack theValueLoader.2 Inspect the shipping box for damage. If you notice any damage,report it to the shipping company immediately.Air quality Minimal sources of particulate contamination.Avoid areas near frequently used doors andwalkways, stacks of supplies that collect dust,printers, or smoke-filled rooms.Caution: Excessive dust or debris can damagetapes and tape drives.Humidity 20-80% RH, non-condensingClearance Back: Minimum of 15.4 cm (6 in)Front: Minimum of 30.8 cm (12 in)Sides: Minimum of 5.08 cm (2 in)Caution: If the room temperature you are working in differs fromthe shipping or storage temperature by 15∞ C (30∞ F) ormore, let the ValueLoader acclimate to the surroundingenvironment for at least 12 hours before opening theshipping carton.Requirement Description |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine