Quantum ValueLoader User Manual
Also see for Quantum ValueLoader: Warranty
                                                                                          | |
Contents
| 
Chapter 2 Operating the ValueLoaderUsing Cartridges28 ValueLoader LTO-1/LTO-2 Tape Autoloader User ManualExportingCartridges 2This option moves a cartridge from a specific slot to the Import/Exportslot. To export one or more cartridges from the ValueLoader, follow thesesteps:1 From the Home Screen or main menu, press the [+] or [-] button untilCommands appears on the top line of the LCD screen. Then, press[Enter].2 Press the [+] or [-] button until Export appears on the LCD screen, andthen press [Enter].3 Press the [+] or [-] button until the desired slot number appears on theLCD screen. Then, press the [Enter] button. You are not given theoption to export from an empty slot.4 When Remove Cartridge appears on the LCD screen and the cartridgeis ejected through the Import/Export slot, remove the exportedcartridge from the ValueLoader, and press the [Enter] button.5 Repeat steps 3 and 4 as needed for any additional cartridges.6 Press the [Cancel] button when you are finished exporting cartridges.7 Make sure the LCD screen indicates that the desired slots are empty.Figure 13 Exporting aCartridge |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine