ValueLoader AdministrationUpdating Firmware40 ValueLoader LTO-1/LTO-2 Tape Autoloader User Manual3 Press the [Enter] button. The LCD screen indicates whether you areabout to turn Autoload Mode on or off.4 Press the [Enter] button to accept the change to Autoload Mode orpress [Cancel] to exit and not save the changes.Updating Firmware 3Using SCSI 3 Quantum has the files and instructions necessary to update both the driveand ValueLoader firmware via SCSI. Refer to www.Quantum.com fordetails.Caution: Regardless of the firmware update technique, do notpower cycle or reset the ValueLoader during the upgradeprocess. Doing so could cause the ValueLoader to becomeinoperable.Note: After a firmware update, the firmware revision displayedon the LCD may not be updated until the ValueLoader ispower cycled.
