Quatech Freedom USB Adapter User’s Manual Installing the softwareStep Procedure Description Step 22 Click the Finish button. The Wizard briefly displays a series ofUnknown hardware found andInstalling messages as it installs eachserial USB port. Your Freedom USBadapter installation is complete!Uninstalling from Windows 2000Follow these steps in the event that you need to uninstall or reinstallthe Freedom USB software.1. From the Control Panel, select System – Hardware. Select theHardware wizard and click Next.2. Choose Uninstall/Unplug a device. Click Next.3. Choose Uninstall a device. Click Next.4. Scroll down to Quatech Freedom USB Serial Adapter; forexample, QSU-100 Quad RS-232 Serial Ports (Group ID2). Selectand click Next.5. Select Yes, I want to uninstall this device at the Confirmationscreen. Click Next.Installing under Windows NTYou must install the Windows NT device driver by running theSETUP program, a command line-based configuration utility foradding USB bus and ISA bus serial ports.Note: Windows NT supports upto 256 serial ports.Be sure to request an installation CD when you order your FreedomUSB. The CD is free, but it is not shipped automatically. You can alsouse an on-line form to request the drivers atwww.Quatech.com/usbnt.htm. You will need to provide your modeland serial number on the form.Note: NT Installation CDs arefree but need to be specificallyordered.See your Quatech sales representative for further information.Rev 2.02 (2/24/2004) Page 17
