Quatech MPAP-100 User Manual

Also see for MPAP-100: Specifications User manual

Contents

Quatech MPAP-100 User Manual Manual pdf 8 page image

3 DOS / Windows 3.x Software InstallationTwo DOS configuration software programs are provided with the MPAP-100: a clientdriver and a card enabler. These programs are executed from DOS (before entering Windows)and allow operation of the MPAP-100 in both the DOS and Windows 3.x environments. Table 1highlights the differences between these programs.Use if Card andSocket Servicessoftware is notavailable and thesystem has an Intel82365 or compatiblesocket controller.Best for most users.RecommendationnoyesPCMCIA Card and SocketServices software requirednoyesAutomatic configuration ofMPAP-100 upon insertion(Hot Swapping)socket controller(Intel 82365 orcompatible only)PCMCIA card andSocket Services(socket-independent)Interfaces toDOS executableDOS device driverFile typeMPAP1EN.EXEMPAP1CL.SYSFile nameEnablerClient DriverTable 1 --- Client driver versus enabler for DOS/Windows 3.x.IMPORTANTDo not use both the client driver and the enabler!If you are unsure whether Card and Socket Services software is currently installed onyour system, install the client driver. When loaded, the client driver will display an errormessage if Card and Socket Services software is not detected. If you receive such an errormessage, remove the client driver software and install the enabler instead.