General InformationThe Sentry Key system complies with FCC rules Part 15and with RSS-210 of Industry Canada. Operation issubject to the following conditions:• This device may not cause harmful interference.• This device must accept any interference that may bereceived, including interference that may cause undes-ired operation.VEHICLE SECURITY ALARM — IF EQUIPPEDThe Vehicle Security Alarm monitors the vehicle doorsand ignition for unauthorized operation. When the Ve-hicle Security Alarm is activated, interior switches fordoor locks are disabled. The system provides both au-dible and visible signals, for the first three minutes thehorn will sound and the headlights, park lamps and/orturn signals will flash and Vehicle Security Light willflash repeatedly. For an additional 15 minutes only, theheadlights, park lamps and/or turn signals and VehicleSecurity Light will flash. The engine will run only if avalid Sentry Key is used to start the vehicle. Use of theSentry Key will disable the alarm.Rearming of the SystemThe Vehicle Security Alarm will rearm itself after the 15additional minutes of headlights and Vehicle SecurityLight flashing, if the system has not been disabled. If thecondition which initiated the alarm is still present, thesystem will ignore that condition and monitor the re-maining doors and ignition.To Arm the SystemThe Vehicle Security Alarm will set when you use thepower door locks, or use the Remote Keyless Entry (RKE)transmitter to lock the doors. After all the doors arelocked and closed, the Vehicle Security Light in theinstrument panel cluster will flash rapidly for about16 seconds to indicate that the alarm is being set. Afterthe alarm is set, the Vehicle Security Light will flash at aslower rate to indicate that the system is armed.18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE