Lap/Shoulder Belt Untwisting ProcedureUse the following procedure to untwist a twisted lap/shoulder belt.1. Position the latch plate as close as possible to theanchor point.2. At about 6 to 12 in (15 to 30 cm) above the latch plate,grasp and twist the belt webbing 180 degrees to create afold that begins immediately above the latch plate.3. Slide the latch plate upward over the folded webbing.The folded webbing must enter the slot at the top of thelatch plate.4. Continue to slide the latch plate up until it clears thefolded webbing.In Use Position2THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47
