1. With the RKE transmitter buttons facing down, use aflat blade screwdriver to pry the two halves of the RKEtransmitter apart. Make sure not to damage the sealduring removal.2. Remove and replace the battery. Avoid touching thenew battery with your fingers. Skin oils may causebattery deterioration. If you touch a battery, clean it withrubbing alcohol.3. To assemble the RKE transmitter case, snap the twohalves together.General InformationThis device complies with Part 15 of the FCC rules andRSS 210 of Industry Canada. Operation is subject to thefollowing conditions:• This device may not cause harmful interference.• This device must accept any interference received,including interference that may cause undesiredoperation.NOTE: Changes or modifications not expressly ap-proved by the party responsible for compliance couldvoid the user’s authority to operate the equipment.If your RKE transmitter fails to operate from a normaldistance, check for these two conditions:1. A weak battery in the RKE transmitter. The expectedlife of the battery is a minimum of three years.2. Closeness to a radio transmitter such as a radio stationtower, airport transmitter, and some mobile or CB radios.REMOTE STARTING SYSTEM — IF EQUIPPEDThis system uses the Remote Keyless Entry(RKE) transmitter to start the engine conve-niently from outside the vehicle while still2THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25