RAMSET RAM 100 Instruction Manual

Also see for RAM 100: Instruction manual

RAMSET RAM 100 Instruction Manual Manual pdf 18 page image

16RAMSETwww.ramsetinc.comRAM 100 • 1000 • 5500Dip Switch “A” Dip Switch “B” Dip Switch “C”“Intelligate” Control BoardFigure 17DIP SWITCH CONFIGURATIONDIP SWITCH S4 - “A”DIP SWITCH “A” 4 - LEFT/RIGHTOFF Left-hand installationON Right-hand installation. Reverses the motor and limitwires without moving any wires.B1 - PREWARNOFF Normal operationON Triggers the relay on JP2, pins 7 & 8, for 3 secondsbefore the gate moves in any direction.B2 - CONSTANT WARNOFF Normal operationON Triggers the relay on JP2, pins 7 & 8B3 - SECURE CLOSEOFF Normal operationON When power is lost and then regained, if all devices areclear and it’s safe, the gate will close.B4 - SECURE OPENOFF Normal operationON If the gate comes off of the limit without a validcommand, the gate will re-open.B5 - ONE PASSOFF Normal operationONWhile the gate is opening, if the safety input is triggeredand then cleared, the gate will immediately startclosing. If the safety input is then activated again,before the gate is fully closed, the gate will stop andstay at rest until the safety loop is cleared. At any timeif a valid open signal is received, the gate will open.B6 - CLOSE DELAYOFF Normal operationON Adds a 1 second delay before the gate closes.B7 - OPEN DELAYOFF Normal operationON Adds a 1 second delay before the gate opens.B8 - RADIO CYCLEOFFGate will open, if on the close limit, and close, if onthe open limit. If in travel, the gate will always open orcontinue to open.ONGate will open, if on the close limit, and close, if on theopen limit. If in travel, the gate will stop with the firstcommand and then reverse with a second command.DIP SWITCH “A” 1, 2 & 3;AUTOMATIC TIMER TO CLOSE GATE‘0’ is “OFF” ‘1’ is “ON”Switch 1 2 3 Gate Open Duration:0 0 0 Disabled0 0 1 00 Seconds0 1 0 5 seconds0 1 1 10 seconds1 0 0 15 seconds1 0 0 30 seconds1 1 0 45 seconds1 1 1 60 SecondsDIP SWITCH S6 - “B”