RAMSET RAM 100 Instruction Manual

Also see for RAM 100: Instruction manual

RAMSET RAM 100 Instruction Manual Manual pdf 19 page image

17RAM 100 • 1000 • 5500RAMSETwww.ramsetinc.comDIP SWITCH CONFIGURATIONC1 - FULL REV ERDOFF Normal operationONWhen closing, if the gate senses an obstruction (ERD),the gate will stop and reverse all the way to the fullyopen limit.C2 - SLOWOFF Normal operationONAdds a slow start when the gate opens and a slow stopwhen the gate closes. The slow stop is triggered by theslow stop switch. (ONLY ON THE ALL SECURE RAILDRIVE OPERATOR)Eliminates having to jumper the foot pedal plug (JP11) and the stopinput (JP3).1 - Foot pedal plug bypassON Bypass ModeOFF Active Mode1 - Stop input plug bypassON Bypass ModeOFF Active ModeManual ERD adjustmentsRange 0 to 70 Most Sensitive7 Least SensitiveSwitches from automatic ERD adjustment (Dip switch C7 & C8) andManual ERD adjustment (Rotary switch S8)Left Automatic ERD (Dip C7 & C8)Right Manual ERD (Rotary S8)C3, C4, C5 & C6OFF No function. These 4 switches should not be turned tothe ‘on’ position.C7 & C8 - ERD 1 & ERD 2Switch 7 8 SensitivityOFF OFF Most SensitiveOFF ON Medium SensitivityON OFF Low SensitivityON ON Least SensitivityDIP SWITCH S5 “C”DIP SWITCH S7ROTARY SWITCH S8SLIDE SWITCH S9WARNING:Do not bypass the foot pedal plug on any unit that has a foot pedal.Bypassing the foot pedal plug can cause damage to you operator,voids all warranties, and may cause serious injury.