RCA 24F530T User Manual

Also see for 24F530T: Specification sheet User guide

Connections and Setup_R TV (back i)ael)"IV ÷ DVB ÷ VCR1. Connect your DVD Player to your "IV.A. Connect the audio {white and red) cables to the VIDEO1 R and LiMONO AUDIOjacks on the backof the #_ and to the Audio Output jacks on the DVD player (sometimes labeEedL and R).B. if your DVD pEayerhas an S-Videojack, connect an S-Video cable to the SWideo jack on the DVDpEayerand to the S-ViDEOjack on the back of the #_. if your DVD player doesn't haveanSWideo jack, go to I D.-OR-C, Model 24F530T only: tf wur DVD player has a component video jacks {Y,Pb,Pr},connect videograde tables to the Component Video jacks on the DVD player and to the Y,Pb, Pr jacks on theback of the ]V. If your DVDplayer doesn't have component video jacks, go to I D.-OR-D. Connect a video cable (yellow) to the Video Output Jack on the DVD player and to the VIDEOjackon the back of the IV.2. Connect your Tv'to your VCRConnect a coaxial cable to the ANTENNAIN jack on your #_ and to the RFOutput jack on wur VCR(sometimes labeled OUTTOTV).3. Make sure e_ble or antenna is connected to your VCR.Connect the coaxial cable from your cable outlet or antenna to the antenna input on the VCR(sometimes labeled in From Antenna),Note; If you do not _.'enn_;-cta cable, antenna, er another ,._mpenent to your 1Y, the T_I will automaticallyshut off after 15 minutes to sav_"power.Dh_nf_r 1