RCA BD20TF10 User Manual

Also see for TruFlat BD20TF10: Brochure & specs

Contents

Chapter 2 27Playing DVDsTo Load and Play a DiscTo put the TV/DVD in DVD mode and play a disc, press the DVD button on the remote control.TipMany discs skip the discmenu and start playingautomatically. To access thedisc menu when you’replaying a disc, press MENUon the remote.An example of a disc menu. Themenus on discs vary because the discmenu is created by the disc’s author.Can'tCatchUpCan'tCatchUp 1. Press the OPEN•CLOSE button on the front of the TV/DVD. The disctray opens.2. Place a disc gently into the tray with the disc’s label facing up(double-sided discs have content on both sides, so you can placeeither side up).3. Press the OPEN•CLOSE or PLAY button. The disc tray closes.The TV/DVD reads the disc’s table of contents, and then one ofthree things happens depending on how the disc was programmed:• The disc starts playing.• The disc menu appears on the screen. One of the options willstart disc play. Highlight that option and press OK on the remote.• The DVD’s main menu appears on the screen. Highlight the Playoption and press OK on the remote.When you stop playing a disc, the unit remembers where you stopped.When you start playing the disc again, the unit picks up where you leftoff unless the disc is removed, the unit is unplugged, or you pressed theSTOP button twice.Can'tCatchUp(WidescreenVersion)This is an exampleof a one-sideddisc.This is an exampleof a 2-sided disc.The title is in thecenter.Using a Disc MenuA disc is capable of having an on-screen menu that is separate from the DVD’s menu system andon-screen Info Display. The disc menu might only contain a list of the titles and chapters, or itmay allow you to change features such as language and playback settings.Although the content and operation of disc menus vary from disc to disc, the following examplewill give you an idea of what to expect.1. While the disc is playing, press the MENUbutton on the remote. The disc menuappears.