RCA BD20TF10 User Manual

Also see for TruFlat BD20TF10: Brochure & specs

Contents

Other InformationChapter 7 93Important Tips!You must continue pressing thecomponent button while youenter the code.Let’s say you have a Zenith VCR.To program the universalremote to operate the VCR youwould:Press and hold the VCR buttonwhile you enter the first codelisted for Zenith in the VCRCodes column.Release the VCR button. PressON•OFF to see if the VCRresponds. If it doesn’t, followthe same steps, but enter thesecond code instead of the first.If the component you want to control does turn off:1. Press and release REVERSE, then wait 2 seconds. Repeat this step until the componentturns back ON.2. To finish, press and hold STOP until the light on the remote turns off.Direct Entry1. Turn on the component to be programmed.2. Look up the brand and code number(s) for the component on the code list in thissection.3. Point the remote at the component.4. Press and hold the component button on the remote you want to program.5. Enter the code from the Remote Control code list on the following pages.6. Release the component button, and then press ON•OFF to see if the componentresponds to the command. If it doesn’t, try pressing the component button and thenON•OFF again.7. If you get no response, repeat these steps using the next code listed for your brand,until the component responds to the remote commands.Operate Components after Programming theRemoteBecause this universal remote can operate several different components (VCR, satellitereceiver, etc.) it uses operational modes triggered by the component buttons. For example ifyou want the remote to operate the TV, you would press the TV button to put the remoteinto TV mode before you could operate the TV.1. Press the appropriate component button (VCR1, VCR2, SAT•CABLE, or AUX) to set theremote to control the component.2. Press ON•OFF to turn the component ON or OFF.3. Use the remote buttons that apply to that component.Note: This remote may not be compatible with all brands and models of components.