Tur ning On the PowerMain unit (front panel)12Connect the DC output plug of theadapter to the DC input jack on themain unit.3Connect the AC adapter to a poweroutlet.The power LED is lit blue.The player can be used now.At standby mode (when the powerLED is lit red), the power can alsobe turned on by pressing thestandby button on the remotecontrol unit.Keep pressing the ON buttonon the main unit for about 1.5seconds.Remote control unit4Hint:The included AC adapter iscompatible with voltage from 100to 240 V, you can use it on tripsoverseas.Note that you need a converter plug(available in stores) suited for theregion in which you are travelling.3123ON OFF23 -ENENGraphics are for representation only. Your unit may differ slightly.Basic Operations
