Volume is different for DVDs and CDsThis is due to the different recording methods.This player incorporates copyright protection technology. Some discs include signals protected againstcopied by a VCR. Such recorded discs can not be played properly..Player cannot be operated with the remote control unitRemote control unit is too far fromthe main unit or have too large angle with the remote sensor.Remote control unit s battery is worn out.For some discs, 96 kHz digital output of linear PCM audio signals is prohibited.Disc is dirty .Pause or slow play mode is set.Main unit s volume is set to minimum.Earphone is plugged in.Picture is disturbed when playing a DVD recorded by a VCR.TV or other device operates erroneouslyNotes:The player may stop operation properly due to static electricity or other external influences.In this case, usually solve the problem by unplugging the power cord and thenplugging it in again. If still can not solve it, consult with the nearest service center.Liquid crystal displayA few picture elements may be black or a particular color displayed on the LCD screen.This is normal.No sound is produced from speakers or sound is distorted,The player s remote control unit may cause some TVs with wireless remote control tooperate erroneously.,No sound is produced or sound is distorted when connected to a TV ,a amplifier, etc.This is normal.Player gets hotConnection cables are not firmly plugged in or not contacted well.Connection plugs or jacks are dirty.Audio cables arenotProperly connected.Audio digital output is connected to a non-compatible AV amplifier,etc.Have wrong DTS setting.The player is set to AV OUT but there are other AV signals inputted from AV jack.Bad playback quality32 -ENTroubleshooting TipsENENGraphics are for representation only. Your unit may differ slightly.Additional Information
